Extensive range of quarried aggregates for road building, path construction, paving and drainage applications.
All our quarried aggregates are available loose and in bulk bags.
Well graded, angular aggregate that provides the necessary interlock required for Highway works clause 803 sub- base, road building and path construction. Our type 1 is regularly tested by an independent laboratory and conforms with BS EN 933-1:2012
With aggregate sizes ranging from 125mm down to dust, 6F5 is suitable for trenchfill, as a capping layer for roads prior to sub-base of type 1 and general fill. Our 6F5 is certified to (BS EN 13285 & BS EN13242) and meets the specification for highways works for capping materials. With the correct blending of particle sizes when screened, this product provides the necessary interlock and lack of voids required for a strong layer before finishing with type 1.
Crusher Run/Scalpings 20mm/40mm/80mm
Although cheaper than type 1, crusher run cannot be guaranteed to be as strong a sub base as type 1 due to the lack of blending of aggregate particle sizes therefore it is recommended only where budget dictates or for trenchfill, hardcore or back fill.
4/20mm graded aggregate
For use in permeable paving systems. Aggregate particles ranging between 4-20mm with no fines, allows water to be stored before being dissipated gradually helping to avoid flash flooding from excessive surface water run off.
Hereford 6mm pea gravel
Our pea gravel can be used for construction purposes such as pipe bedding or large scale drainage or equally effective as a decorative aggregate with uses including pathways, garden borders and as a mulch. Our pea gravel conforms with BS EN 12620.
For further details, prices and delivery information on any of our quarried aggregates please contact us today.
Telephone: 01432 277598
Online Contact Form